The SKC 2995 (02995 above) is the SKC pulled out of the cluster that was paired with the original 1.8T ECU. Also the new VIN information does not transfer to the new ECU. (Login procedure does not produce an error nor a disconnect from VCDS.) With the original 2003 1.8T cluster and 2003 ALH ECU and following Ross Tech's Instructions I get a 'System NOT OK' error when entering the old SKC into adaptation channel 50 when I'm supposed to get VIN and IMMO-ID information.
As we don't have the cluster from the 2003 ALH the donor ECU came out of I retrieved the SKC from the 24C04 EPROM in the ECU and confirmed I can log into the ECU. I retrieved the SKC out of the original 1.8T cluster, which I presume matches the SKC in the ECU that was working with the car.
The Auto to Manual conversions have been done to the harness. The ALH itself is from an '00, but we've got a '03 Auto TDI ECU and harness. We've got a 2003 1.8T Jetta GLX Wagon that's getting an ALH with a DRW 6-speed. Seems like my 2nd post here is going to be a long one and a doozie. ECU Adaptation Issues | ALH 1.9T EDC15 into 1.8T GLX ME7.5 Chassis
